Avoiding Bigger Problems with Pool Liner Replacement in Kansas

/in /by

Over time, pool liners deteriorate. However, instead of putting off pool liner replacement in Kansas, you want to take care of it right away to avoid even bigger problems. Typically, the highest-quality pool liners for both aboveground and in-ground swimming pools last between 8 and 12 years, so this is your first indicator that a replacement is necessary.

Another indication that you need a new pool liner is that the color will start to fade. You might also notice a slow leak or areas that are cracking. Other indicators include a gooey-like surface, the liner pulling out of the track above the waterline, and diminished elasticity.

Obviously, you want to get the most out of a pool liner that you can, but waiting too long could lead to catastrophic damage. A prime example: If you do not get pool liner replacement in Kansas when needed, the walls of the pool could collapse. This is something that happens when the water level remains too low during the months that the pool is inactive.

By not having the liner replaced when necessary, the walls can collapse in the summer, as well. Not only would you lose a tremendous amount of water, this could shut down the pool for the entire season. Although pool liner replacement in Kansas is something that can be done as a do-it-yourself project, to keep the manufacturer’s warranty intact, you want to hire a reputable contractor. A licensed contractor will get the job done correctly and in less time.

A huge benefit of pool liner replacement in Kansas is that you have the opportunity to select from a wide range of colors and styles. If your previous liner was standard or even boring, this is the perfect time to consider border motifs, different solid colors, mosaic-like designs, and even marbled patterns. A new liner with a seashell or boat motif would enhance the entire backyard.

To ensure the pool liner replacement in Kansas lasts for years, you want to follow all manufacturer recommendations. You also need to adjust and maintain the proper alkalinity, keeping the level between 80 and 110 parts per million. This slows down and actually ends the bleaching of the liner. When the level of acid is too high, the color of the pool liner fades. This also draws out plasticides, which leads to problems of shrinkage and a loss of flexibility.

Ideas for Coordinating Pools and Patios in Kansas

/in /by

 

Pools and Patios

Pool with hot tub.

When installing pools and patios in Kansas, it is best to go with a cohesive look. When the aesthetics for a pool and patio are different, the entire backyard looks and feels disjointed. Not only is this visually distracting, it can affect the flow of movement when entertaining family and friends.

The good news is that you have incredible options for coordinating your pool and patio. Over the years, pools and patios have grown in popularity, giving Kansas homeowners the opportunity to be creative. Even if you live in a rural area, there is no reason to limit yourself. If you want a pool and patio that looks like a Florida spa oasis, the right contractor will get the job done.

An important decision when coordinating pools and patios in Kansas is the actual concrete surfaces. For something fluid and refined, both the pool deck and patio floor can share the same type and color of decorative concrete. However, you can also mix and match designs; just be careful to keep the fluidity.

When coordinating pools and patios in Kansas, other concrete surfaces should be considered, including countertops, steps, water features, fire pits, and more. You can choose the same color and design for both spaces or go with something complementary. An exposed aggregate concrete that resembles small cobblestones as a border around the pool deck or to enhance a swim-up bar or built-in seating would look gorgeous coupled with larger aggregate concrete for the patio area. This gives each space a distinct look while blending beautifully.

Regardless of the outcome you want, it is important to work with a reputable contractor. A contractor who coordinates pools and patios in Kansas should listen and be willing to incorporate your ideas while offering a professional opinion as to what works best.

Waterproofing Tips for Gunite Pools in Overland Park

/in /by

Gunite pools are quite popular in Overland Park. A mixture of cement, aggregate, and water sprayed over the surface under pneumatic pressure is used, along with a rebar frame. Because gunite is porous, plaster is sprayed between this material and the pool’s water to create a water barrier.

If the applied plaster is not thick enough, water seepage through the gunite is possible. When that happens, water is wasted. Isolating the loss is nearly impossible unless the pool is completely drained. Fortunately, there are viable options for dealing with gunite pools in Overland Park that leak.

Gunite pools develop cracks for different reasons. As an example, when water from behind the structure permeates any porous voids, the temperature changes. This causes expansion and contraction that put this type of pool at risk for cracking. However, cracks can also develop if the surrounding ground shifts. Typically, shifting occurs due to freeze/thaw cycles and changes in the water table.

Based on the problem, a licensed contractor will use the appropriate repair method. For a very small leak, pouring a waterproof sealant into the pool usually works well. If the plaster was incorrectly applied or when water seeps through the porous gunite material, the contractor will identify the problem area, followed by applying an additional layer of plaster. If the grout line or the plaster itself is deteriorating, re-plastering may be required.

When the plaster in gunite pools in Overland Park cracks, the preferred solution is pressurized polymer. Because this material adheres to the pool’s structure, it bonds the pieces together. After the polymer is applied, a plaster coating is sprayed on, making the repair job unnoticeable. For large cracks, the structure must first be stabilized. Then, the gunite structure is locked together and a polymer crack injection is used to seal the leak. Finally, the repaired crack and polymer injection are re-plastered.